using System;
using System.Drawing;
using System.Collections;
using System.ComponentModel;
using System.Windows.Forms;
using System.Data;
namespace DbInMo
{
/// <summary>
/// Form1 的摘要说明。
/// </summary>
public class 渲染示例 : System.Windows.Forms.Form
{
private AxMapObjects2.AxMap map;
private System.Windows.Forms.Button 直方图;
private System.Windows.Forms.Button 饼图;
private System.Windows.Forms.Button 点密度;
private System.Windows.Forms.Button 按值渲染;
private System.Windows.Forms.Button 分类渲染;
private System.Windows.Forms.Button Z值渲染;
private System.Windows.Forms.Button 组渲染;
private System.Windows.Forms.Button 退出;
private System.Windows.Forms.Panel 操作板;
private System.Windows.Forms.Button 删除所有渲染;
private System.Windows.Forms.Panel panel1;
private System.Windows.Forms.Button 全图;
private System.Windows.Forms.Button 拖动;
private System.Windows.Forms.Button 缩小;
private System.Windows.Forms.Button 放大;
private System.Windows.Forms.Panel 分隔符;
private System.Windows.Forms.Button 标注渲染;
/// <summary>
/// 必需的设计器变量。
/// </summary>
private System.ComponentModel.Container components = null;
public 渲染示例()
{
//
// Windows 窗体设计器支持所必需的
//
InitializeComponent();
//
// TODO: 在 InitializeComponent 调用后添加任何构造函数代码
//
}
/// <summary>
/// 清理所有正在使用的资源。
/// </summary>
protected override void Dispose( bool disposing )
{
if( disposing )
{
if (components != null)
{
components.Dispose();
}
}
base.Dispose( disposing );
}
#region Windows 窗体设计器生成的代码
/// <summary>
/// 设计器支持所需的方法 - 不要使用代码编辑器修改
/// 此方法的内容。
/// </summary>
private void InitializeComponent()
{
System.Resources.ResourceManager resources = new System.Resources.ResourceManager(typeof(渲染示例));
this.map = new AxMapObjects2.AxMap();
this.操作板 = new System.Windows.Forms.Panel();
this.直方图 = new System.Windows.Forms.Button();
this.饼图 = new System.Windows.Forms.Button();
this.点密度 = new System.Windows.Forms.Button();
this.按值渲染 = new System.Windows.Forms.Button();
this.分类渲染 = new System.Windows.Forms.Button();
this.Z值渲染 = new System.Windows.Forms.Button();
this.组渲染 = new System.Windows.Forms.Button();
this.退出 = new System.Windows.Forms.Button();
this.标注渲染 = new System.Windows.Forms.Button();
this.删除所有渲染 = new System.Windows.Forms.Button();
this.panel1 = new System.Windows.Forms.Panel();
this.全图 = new System.Windows.Forms.Button();
this.拖动 = new System.Windows.Forms.Button();
this.缩小 = new System.Windows.Forms.Button();
this.放大 = new System.Windows.Forms.Button();
this.分隔符 = new System.Windows.Forms.Panel();
((System.ComponentModel.ISupportInitialize)(this.map)).BeginInit();
this.操作板.SuspendLayout();
this.SuspendLayout();
//
// map
//
this.map.Dock = System.Windows.Forms.DockStyle.Fill;
this.map.Location = new System.Drawing.Point(0, 0);
this.map.Name = "map";
this.map.OcxState = ((System.Windows.Forms.AxHost.State)(resources.GetObject("map.OcxState")));
this.map.Size = new System.Drawing.Size(616, 429);
this.map.TabIndex = 0;
this.map.MouseDownEvent += new AxMapObjects2._DMapEvents_MouseDownEventHandler(this.map_MouseDownEvent);
//
// 操作板
//
this.操作板.BorderStyle = System.Windows.Forms.BorderStyle.Fixed3D;
this.操作板.Controls.Add(this.删除所有渲染);
this.操作板.Controls.Add(this.panel1);
this.操作板.Controls.Add(this.全图);
this.操作板.Controls.Add(this.拖动);
this.操作板.Controls.Add(this.缩小);
this.操作板.Controls.Add(this.放大);
this.操作板.Controls.Add(this.分隔符);
this.操作板.Controls.Add(this.标注渲染);
this.操作板.Controls.Add(this.退出);
this.操作板.Controls.Add(this.组渲染);
this.操作板.Controls.Add(this.Z值渲染);
this.操作板.Controls.Add(this.分类渲染);
this.操作板.Controls.Add(this.按值渲染);
this.操作板.Controls.Add(this.点密度);
this.操作板.Controls.Add(this.饼图);
this.操作板.Controls.Add(this.直方图);
this.操作板.Dock = System.Windows.Forms.DockStyle.Right;
this.操作板.Location = new System.Drawing.Point(496, 0);
this.操作板.Name = "操作板";
this.操作板.Size = new System.Drawing.Size(120, 429);
this.操作板.TabIndex = 1;
//
// 直方图
//
this.直方图.Dock = System.Windows.Forms.DockStyle.Top;
this.直方图.Location = new System.Drawing.Point(0, 0);
this.直方图.Name = "直方图";
this.直方图.Size = new System.Drawing.Size(116, 24);
this.直方图.TabIndex = 0;
this.直方图.Text = "直方图";
this.直方图.Click += new System.EventHandler(this.直方图_Click);
//
// 饼图
//
this.饼图.Dock = System.Windows.Forms.DockStyle.Top;
this.饼图.Location = new System.Drawing.Point(0, 24);
this.饼图.Name = "饼图";
this.饼图.Size = new System.Drawing.Size(116, 24);
this.饼图.TabIndex = 1;
this.饼图.Text = "饼图";
this.饼图.Click += new System.EventHandler(this.饼图_Click);
//
// 点密度
//
this.点密度.Dock = System.Windows.Forms.DockStyle.Top;
this.点密度.Location = new System.Drawing.Point(0, 48);
this.点密度.Name = "点密度";
this.点密度.Size = new System.Drawing.Size(116, 23);
this.点密度.TabIndex = 2;
this.点密度.Text = "点密度";
this.点密度.Click += new System.EventHandler(this.点密度_Click);
//
// 按值渲染
//
this.按值渲染.Dock = System.Windows.Forms.DockStyle.Top;
this.按值渲染.Location = new System.Drawing.Point(0, 71);
this.按值渲染.Name = "按值渲染";
this.按值渲染.Size = new System.Drawing.Size(116, 23);
this.按值渲染.TabIndex = 3;
this.按值渲染.Text = "按值渲染";
this.按值渲染.Click += new System.EventHandler(this.按值渲染_Click);
//
// 分类渲染
//
this.分类渲染.Dock = System.Windows.Forms.DockStyle.Top;
this.分类渲染.Location = new System.Drawing.Point(0, 94);
this.分类渲染.Name = "分类渲染";
this.分类渲染.Size = new System.Drawing.Size(116, 23);
this.分类渲染.TabIndex = 4;
this.分类渲染.Text = "分类渲染";
this.分类渲染.Click += new System.EventHandler(this.分类渲染_Click);
//
// Z值渲染
//
this.Z值渲染.Dock = System.Windows.Forms.DockStyle.Top;
this.Z值渲染.Location = new System.Drawing.Point(0, 117);
this.Z值渲染.Name = "Z值渲染";
this.Z值渲染.Size = new System.Drawing.Size(116, 23);
this.Z值渲染.TabIndex = 5;
this.Z值渲染.Text = "Z值渲染";
this.Z值渲染.Click += new System.EventHandler(this.Z值渲染_Click);
//
// 组渲染
//
this.组渲染.Dock = System.Windows.Forms.DockStyle.Top;
this.组渲染.Location = new System.Drawing.Point(0, 140);
this.组渲染.Name = "组渲染";
this.组渲染.Size = new System.Drawing.Size(116, 23);
this.组渲染.TabIndex = 6;
this.组渲染.Text = "组渲染";
this.组渲染.Click += new System.EventHandler(this.组渲染_Click);
//
// 退出
//
this.退出.Dock = System.Windows.Forms.DockStyle.Bottom;
this.退出.Location = new System.Drawing.Point(0, 402);
this.退出.Name = "退出";
this.退出.Size = new System.Drawing.Size(116, 23);
this.退出.TabIndex = 7;
this.退出.Text = "退出";
this.退出.Click += new System.EventHandler(this.退出_Click);
//
// 标注渲染
//
this.标注渲染.Dock = System.Windows.Forms.DockStyle.Top;
this.标注渲染.Location = new System.Drawing.Point(0, 163);
this.标注渲染.Name = "标注渲染";
this.标注渲染.Size = new System.Drawing.Size(116, 23);
this.标注渲染.TabIndex = 7;
this.标注渲染.Text = "标注渲染";
this.标注渲染.Click += new System.EventHandler(this.标注渲染_Click);
//
// 删除所有渲染
//
this.删除所有渲染.Dock = System.Windows.Forms.DockStyle.Top;
this.删除所有渲染.Location = new System.Drawing.Point(0, 319);
this.删除所有渲染.Name = "删除所有渲染";
this.删除所有渲染.Size = new System.Drawing.Size(116, 23);
this.删除所有渲染.TabIndex = 22;
this.删除所有渲染.Text = "删除所有渲染";
this.删除所有渲染.Click += new System.EventHandler(this.删除所有渲染_Click);
//
// panel1
//
this.panel1.Dock = System.Windows.Forms.DockStyle.Top;
this.panel1.Location = new System.Drawing.Point(0, 299);
this.panel1.Name = "panel1";
this.panel1.Size = new System.Drawing.Size(116, 20);
this.panel1.TabIndex = 21;
//
// 全图
//
this.全图.Dock = System.Windows.Forms.DockStyle.Top;
this.全图.Location = new System.Drawing.Point(0, 276);
this.全图.Name = "全图";
this.全图.Size = new System.Drawing.Size(116, 23);
this.全图.TabIndex = 20;
this.全图.Text = "全图";
this.全图.Click += new System.EventHandler(this.全图_Click);
//
// 拖动
//
this.拖动.Dock = System.Windows.Forms.DockStyle.Top;
this.拖动.Location = new System.Drawing.Point(0, 253);
this.拖动.Name = "拖动";
this.拖动.Size = new System.Drawing.Size(116, 23);
this.拖动.TabIndex = 19;
this.拖动.Text = "拖动";
this.拖动.Click += new System.EventHandler(this.拖动_Click);
//
// 缩小
//
this.缩小.Dock = System.Windows.Forms.DockStyle.Top;
this.缩小.Location = new System.Drawing.Point(0, 230);
this.缩小.Name = "缩小";
this.缩小.Size = new System.Drawing.Size(116, 23);
this.缩小.TabIndex = 18;
this.缩小.Text = "缩小";
this.缩小.Click += new System.EventHandler(this.缩小_Click);
//
// 放大
//
this.放大.Dock = System.Windows.Forms.DockStyle.Top;
this.放大.Location = new System.Drawing.Point(0, 207);
this.放大.Name = "放大";
this.放大.Size = new System.Drawing.Size(116, 23);
this.放大.TabIndex = 17;
this.放大.Text = "放大";
this.放大.Click += new System.EventHandler(this.放大_Click);
//
// 分隔符
//
this.分隔符.Dock = System.Windows.Forms.DockStyle.Top;
this.分隔符.Location = new System.Drawing.Point(0, 186);
this.分隔符.Name = "分隔符";
this.分隔符.Size = new System.Drawing.Size(116, 21);
this.分隔符.TabIndex = 16;
//
// 渲染示例
//
this.AutoScaleBaseSize = new System.Drawing.Size(6, 14);
this.ClientSize = new System.Drawing.Size(616, 429);
this.Controls.Add(this.操作板);
this.Controls.Add(this.map);
this.Name = "渲染示例";
this.Text = "渲染示例";
this.WindowState = System.Windows.Forms.FormWindowState.Maximized;
((System.ComponentModel.ISupportInitialize)(this.map)).EndInit();
this.操作板.ResumeLayout(false);
this.ResumeLayout(false);
}
#endregion
/// <summary>
/// 应用程序的主入口点。
/// </summary>
[STAThread]
static void Main()
{
Application.Run(new 渲染示例());
}
/// <summary>
/// 退出系统
/// </summary>
private void 退出_Click(object sender, System.EventArgs e)
{
this.Close();
}
/// <summary>
/// 图表渲染，值方图
/// </summary>
private void 直方图_Click(object sender, System.EventArgs e)
{
//直方图的例子中使用Lakers图层
//
//定义图标渲染变量
MapObjects2.ChartRenderer cr = new MapObjects2.ChartRendererClass();
//设置渲染类型为直方图
cr.ChartType = MapObjects2.ChartTypeConstants.moBar;
//设置直方图显示的字段个数为两个，就是直方图显示两个柱子
cr.FieldCount = 2;
//设置第一个字段，请参看lakes.dbf
cr.set_Field(0,"SURF_ELEV");
//设置这个直方图的柱子颜色为红色
cr.set_Color(0,(uint)MapObjects2.ColorConstants.moRed);
//设置第二个柱子
cr.set_Field(1,"DEPTH");
cr.set_Color(1,(uint)MapObjects2.ColorConstants.moGreen);
MapObjects2.MapLayer lyr = (MapObjects2.MapLayer)(map.Layers.Item("lakes"));
lyr.Renderer = cr;
//使用Refresh()刷新老也是刷新不好，正没办法。。。，设为全图倒是不错的注意，^_^
map.Refresh();
}
/// <summary>
/// 全图视野
/// </summary>
private void 全图_Click(object sender, System.EventArgs e)
{
map.Extent = map.FullExtent;
}
/// <summary>
/// 拖动，只设置图标
/// </summary>
private void 拖动_Click(object sender, System.EventArgs e)
{
map.MousePointer = MapObjects2.MousePointerConstants.moPan;
}
/// <summary>
/// 缩小，只设置图标
/// </summary>
private void 缩小_Click(object sender, System.EventArgs e)
{
map.MousePointer = MapObjects2.MousePointerConstants.moZoomOut;
}
/// <summary>
/// 放大，只设置图标
/// </summary>
private void 放大_Click(object sender, System.EventArgs e)
{
map.MousePointer = MapObjects2.MousePointerConstants.moZoomIn;
}
/// <summary>
/// 鼠标按下时间，处理地图放大、缩小、拖动等。
/// </summary>
private void map_MouseDownEvent(object sender, AxMapObjects2._DMapEvents_MouseDownEvent e)
{
MapObjects2.Rectangle rect;
MapObjects2.Point pt = map.ToMapPoint(e.x,e.y);
if(e.button == 2)//右键点击取消
{
map.MousePointer = MapObjects2.MousePointerConstants.moDefault;
}
if(map.MousePointer == MapObjects2.MousePointerConstants.moPan)//拖动
{
map.Pan();
}
else if(map.MousePointer == MapObjects2.MousePointerConstants.moZoomIn)//放大
{
rect = map.TrackRectangle();
if(rect == null|| (rect.Width < 0.00005) || (rect.Height < 0.00005))
{
rect = map.Extent;
rect.ScaleRectangle(0.6667);
rect.Offset(-(rect.Center.X - pt.X),-(rect.Center.Y - pt.Y));
}
map.Extent = rect;
}
else if(map.MousePointer == MapObjects2.MousePointerConstants.moZoomOut)//缩小
{
rect = map.TrackRectangle();
if ((null == rect) || (rect.Width < 0.00005) || (rect.Height < 0.00005))
{
rect = map.Extent;
rect.ScaleRectangle(1.5);
rect.Offset(-(rect.Center.X - pt.X),-(rect.Center.Y - pt.Y));
}
else
{
double dRate = map.Extent.Width / rect.Width * 10;
rect.ScaleRectangle(dRate);
}
map.Extent = rect;
}
}
/// <summary>
/// 图表渲染，使用饼图
/// </summary>
private void 饼图_Click(object sender, System.EventArgs e)
{
//饼图的例子中使用Lakers图层
//过程和直方图一样
//
//定义图标渲染变量
MapObjects2.ChartRenderer cr = new MapObjects2.ChartRendererClass();
//设置渲染类型为饼图
cr.ChartType = MapObjects2.ChartTypeConstants.moPie;
//设置饼图显示的字段个数为两个，就是饼图显示两半
cr.FieldCount = 2;
//设置第一个字段，请参看lakes.dbf
cr.set_Field(0,"SURF_ELEV");
//设置这个饼图的一半颜色为红色
cr.set_Color(0,(uint)MapObjects2.ColorConstants.moRed);
//设置第二半
cr.set_Field(1,"DEPTH");
cr.set_Color(1,(uint)MapObjects2.ColorConstants.moGreen);
//添加到地图上
MapObjects2.MapLayer lyr = (MapObjects2.MapLayer)(map.Layers.Item("lakes"));
lyr.Renderer = cr;
//刷新
map.Refresh();
}
/// <summary>
/// 点密度渲染
/// </summary>
private void 点密度_Click(object sender, System.EventArgs e)
{
//点密度的例子中使用lakes图层
//
//定义点密度渲染变量
MapObjects2.DotDensityRenderer ddr = new MapObjects2.DotDensityRendererClass();
//设置渲染的数据字段，请参看lakes.dbf
ddr.Field = "DEPTH";
//点大小
ddr.DotSize = 3;
//点颜色
ddr.DotColor = (uint)MapObjects2.ColorConstants.moBlue;
ddr.DotValue = 1;
ddr.DrawBackground = true;
//添加到地图上
MapObjects2.MapLayer lyr = (MapObjects2.MapLayer)(map.Layers.Item("lakes"));
lyr.Renderer = ddr;
//刷新
map.Refresh();
}
/// <summary>
/// 按值渲染
/// </summary>
private void 按值渲染_Click(object sender, System.EventArgs e)
{
//按值渲染的例子中使用country图层，这里利用按值渲染，将每个国家用不同的颜色显示
//
//字符串s变量，很像Delphi中的TStringList，^_^
MapObjects2.Strings strs = new MapObjects2.StringsClass();
//图层变量，引用country图层
MapObjects2.MapLayer lyr = (MapObjects2.MapLayer)map.Layers.Item("country");
//Recordset对象，我将在以后的文章中陆续讲解关于MapObjects2.2中使用数据集变量的内容！！！
//使用方法大致与VB中对数据表的操作差不多。
MapObjects2.Recordset rc = lyr.Records;
//这个循环获取所有国家的简称代码列表
while(!rc.EOF)
{
strs.Add(rc.Fields.Item("FIPS_CODE").ValueAsString);
rc.MoveNext();
}
//定义按值渲染对象
MapObjects2.ValueMapRenderer vmr = new MapObjects2.ValueMapRendererClass();
//将其添加到图层
lyr.Renderer = vmr;
//设置渲染使用的字段，请参看country.dbf文件
vmr.Field = "FIPS_CODE";
//渲染的个数
vmr.ValueCount = strs.Count;
//缺省值
vmr.UseDefault = true;
MapObjects2.Symbol sym = vmr.DefaultSymbol;
sym.Color = (uint)MapObjects2.ColorConstants.moYellow;//缺省颜色为黄色
//渲染过程
for(int i=0;i<vmr.ValueCount;i++)
{
vmr.set_Value((short)i,strs.Item((short)i));
}
//刷新
map.Refresh();
}
/// <summary>
/// 分类渲染
/// </summary>
private void 分类渲染_Click(object sender, System.EventArgs e)
{
//分类渲染的例子使用country图层
//
//图层变量引用cities层
MapObjects2.MapLayer lyr = (MapObjects2.MapLayer)(map.Layers.Item("cities"));
//定义分类渲染变量
MapObjects2.ClassBreaksRenderer cbr = new MapObjects2.ClassBreaksRendererClass();
//添加到地图
lyr.Renderer = cbr;
//设置符号类型为点，也可使用其他类型，请自己试验，方法大概都差不多
cbr.SymbolType = MapObjects2.SymbolTypeConstants.moPointSymbol;
//设置字段，请参看cities.dbf文件
cbr.Field = "POPULATION";
//Statistics对象经常配合分类渲染使用，他表示用一个Recordset对象的CalculateStatistics方法
// 对一个数值字段的统计计算结果
MapObjects2.Statistics stat = lyr.Records.CalculateStatistics("POPULATION");
//Mean——平均值，StdDev——均方差
double fbv = stat.Mean - (stat.StdDev * 3);
for(int i=0;i<6;i++)
{
if((fbv >= stat.Min)&&fbv <= stat.Max)
{
//分类个数，依次加一
cbr.BreakCount = (short)(cbr.BreakCount + 1);
//设置分类
cbr.set_Break((short)(cbr.BreakCount - 1),fbv);
}
fbv += stat.StdDev;
}
//SizeSymbols方法制定头尾的大小用来表现点特征大小渐进效果
cbr.SizeSymbols(3,8);
//RampColors方法设置颜色从白色到红色的渐进显示
cbr.RampColors((uint)MapObjects2.ColorConstants.moWhite,(uint)MapObjects2.ColorConstants.moRed);
//刷新
map.Refresh();
}
/// <summary>
/// Z值渲染
/// </summary>
private void Z值渲染_Click(object sender, System.EventArgs e)
{
//本来想好好搞搞，可是我找不到带有Z值的地图，哈哈，认了吧，下面给出基本的语句，有兴趣的
//兄弟姐妹们可以自己试试
// MapObjects2.ZRenderer zr = new MapObjects2.ZRendererClass();
// //Z值分成几部分？
// zr.BreakCount = 2;
// //设置各个部分的分界线
// zr.set_Break(0,100);
// zr.set_Break(1,1000);
// //设置特征类型
// zr.SymbolType = MapObjects2.SymbolTypeConstants.moPointSymbol;
// MapObjects2.Symbol sym;
// for(short i=0;i<zr.BreakCount;i++)
// {
// //获取特征
// sym = zr.get_Symbol(i);
// //设置特征属性，定义一个颜色数组，将不同特征设置不同颜色，效果会明显些
// sym.Color = (uint)MapObjects2.ColorConstants.moRed;
// sym.Size = 6;
// sym.Style = MapObjects2.MarkerStyleConstants.moTriangleMarker;
// }
// //添加到地图
// MapObjects2.MapLayer lyr = (MapObjects2.MapLayer)map.Layers.Item("带有Z值的图层名称");
// lyr.Renderer = zr;
// //刷新
// map.Refresh();
}
/// <summary>
/// 组渲染
/// </summary>
private void 组渲染_Click(object sender, System.EventArgs e)
{
//组渲染其实就是组合渲染，一般定义多个渲染方式，然后使用如下的语句进行组合
MapObjects2.MapLayer lyr = (MapObjects2.MapLayer)map.Layers.Item("country");
//标注渲染
MapObjects2.LabelRenderer lr = new MapObjects2.LabelRendererClass();
lr.Field = "NAME";
lr.get_Symbol(0).Color = (uint)MapObjects2.ColorConstants.moBlack;
lr.get_Symbol(0).Font.Size = 8;
//按值渲染
MapObjects2.Strings strs = new MapObjects2.StringsClass();
MapObjects2.Recordset rc = lyr.Records;
while(!rc.EOF)
{
strs.Add(rc.Fields.Item("FIPS_CODE").ValueAsString);
rc.MoveNext();
}
MapObjects2.ValueMapRenderer vmr = new MapObjects2.ValueMapRendererClass();
vmr.Field = "FIPS_CODE";
vmr.ValueCount = strs.Count;
vmr.UseDefault = true;
MapObjects2.Symbol sym = vmr.DefaultSymbol;
sym.Color = (uint)MapObjects2.ColorConstants.moYellow;
for(int i=0;i<vmr.ValueCount;i++)
{
vmr.set_Value((short)i,strs.Item((short)i));
}
//将二者组合，添加到图层
MapObjects2.GroupRenderer gr = new MapObjects2.GroupRendererClass();
gr.Add(vmr);
gr.Add(lr);
lyr.Renderer = gr;
map.Refresh();
}
/// <summary>
/// 删除所有渲染
/// </summary>
private void 删除所有渲染_Click(object sender, System.EventArgs e)
{
MapObjects2.MapLayer lyr;
for(int i=0;i<map.Layers.Count;i++)
{
lyr = (MapObjects2.MapLayer)map.Layers.Item(i);
lyr.Renderer = new MapObjects2.LabelRendererClass();
map.Refresh();
}
}
/// <summary>
/// 标注渲染
/// </summary>
private void 标注渲染_Click(object sender, System.EventArgs e)
{
MapObjects2.MapLayer lyr = (MapObjects2.MapLayer)map.Layers.Item("cities");
MapObjects2.LabelRenderer lr = new MapObjects2.LabelRendererClass();
lr.Field = "NAME";
lr.get_Symbol(0).Color = (uint)MapObjects2.ColorConstants.moBlack;
lr.get_Symbol(0).Font.Size = 8;
lyr.Renderer = lr;
map.Refresh();
}
}
}
C#+MO实现一些渲染功能_C#教程
时间： 2024-03-05 09:10:00
C#+MO实现一些渲染功能_C#教程的相关文章
使用C#语言实现的查询条件界面展开和收起功能_C#教程
先简单说一下应用场景,现有一个C#客户端的查询界面,上方放置查询条件,下方放置查询结果.因为实际情况中查询条件可能占了好几行的位置,所以希望在界面上默认只保留一行最主要的查询条件,并在右侧有一个"展开/收起"功能. 收起时界面: 展开时界面: 最开始我的实现方式是这样的,在界面上放置一个LinkLabel,设置此LinkLabel的鼠标单击事件,调整查询条件所在Panel的Height属性. C#代码如下: using System; using System.Collections.
C#在winform中实现数据增删改查等功能_C#教程
winform中利用ado.net实现对单表的增删改查的详细例子,具体如下: 1.前言: 运行环境:VS2013+SQL2008+Windows10 程序界面预览: 使用的主要控件:dataGridview和menuStrip等. 2.功能具体介绍: 1.首先,我们要先实现基本的数据操作,增删改查这几个操作. (1)先定义一个数据库操作的公共类: using System; using System.Collections.Generic; using System.Linq; using S
Python的Flask框架中实现分页功能的教程
这篇文章主要介绍了Python的Flask框架中实现分页功能的教程,文中的示例基于一个博客来实现,需要的朋友可以参考下 Blog Posts的提交 让我们从简单的开始.首页上必须有一张用户提交新的post的表单. 首先我们定义一个单域表单对象(fileapp/forms.py): ? 1 2 class PostForm(Form): post = TextField('post', validators = [Required()]) 下面,我们把这个表单添加到template中(file
ZBrush画布功能使用教程
ZBrush画布功能使用教程 ZBrush的画布是有深度的,在ZBrush里面画布也被叫做是一个文档,工作文档类似一个3D场景.它包含了灯光.材质和几何体.只是在ZBrush中的文档中几何体是2.5D的,这允许你工作的场景中有更加复杂的对象.不过,它要求你在开始工作时必须先建立一个视角,需要注意的是,ZBrush的文档中不包括3D模型,保存文档时将不会保存3D的模型,3D模型必须按下Tool>Save As分开保存. 灯光在ZBrush中能够用来设置场景的气氛,它们在你的画布上投下阴影照亮材
.Net WInform开发笔记(三)谈谈自制控件(自定义控件)_C#教程
末日这天写篇博客吧,既然没来,那就纪念一下. 这次谈谈自制控件,也就是自定义控件,先上图,再说 1.扩展OpenFileDialog,在OpenFileDialog中添加各种文件(.txt,.jpg,.excel等等)的预览功能 开发笔记(三)谈谈自制控件(自定义控件)_C#教程-winform自定义控件"> 2.重写ListBox,增加折叠.鼠标背影.分类等功能 -----------------------------分割线-------------------------------
.Net WInform开发笔记(二)Winform程序运行结构图及TCP协议在Winform中的应用_C#教程
中午没事,把去年刚毕业那会画的几张图翻出来了,大概介绍Winform应用程序运行的过程,以及TCP协议在Winform中的应用.如果有Windows消息机制等基础,很好理解这两张图. (1)Winform应用程序运行结构图 开发笔记(二)Winform程序运行结构图及TCP协议在Winform中的应用_C#教程-tcp ip协议 层结构图"> (2)TCP通讯协议在Winform程序中的应用示意图 熟悉整个程序的来龙去脉,编程的时候就会很轻松,不会云里雾里. 另附公司招聘面试题一份,用了几
Python的Flask框架中实现简单的登录功能的教程
Python的Flask框架中实现简单的登录功能的教程,登录是各个web框架中的基础功能,需要的朋友可以参考下 回顾 在前面的系列章节中,我们创建了一个数据库并且学着用用户和邮件来填充,但是到现在我们还没能够植入到我们的程序中. 两章之前,我们已经看到怎么去创建网络表单并且留下了一个实现完全的登陆表单. 在这篇文章中,我们将基于我门所学的网络表单和数据库来构建并实现我们自己的用户登录系统.教程的最后我们小程序会实现新用户注册,登陆和退出的功能. 为了能跟上这章节,你需要前一章节最后部分,我们
用JavaScript实现页面重定向功能的教程
这篇文章主要介绍了用JavaScript实现页面重定向功能的教程,是JS入门学习中的基础知识,需要的朋友可以参考下 页面重定向是什么? 当你点击一个URL来访问一个网页X,但在内部你被定向到另一页Y,仅仅是因为页面重定向.这一概念是从不同于JavaScript 页面刷新 . 可能有各种原因,为什么想从原来的页面重定向.下面列出的几个原因: 如果不喜欢你的域名,可以重定向到一个新的.同时,要引导所有访问者到新网站.在这种情况下,可以保持旧的域名,但放在一个页面到一个页面重定向使所有的旧域名游客
给Python中的MySQLdb模块添加超时功能的教程
这篇文章主要介绍了给Python中的MySQLdb模块添加超时功能的教程,timeout功能在服务器的运维当中非常有用,需要的朋友可以参考下 使用Python操作MySQL数据库的时候常使用MySQLdb这个模块. 今天在开发的过程发现MySQLdb.connect有些参数没法设置.通过这个页面我们可以看到在connect的时候,可以设置的option和client_flags和MySQL c api相比差不少. 一个很重要的参数 MYSQL_OPT_READ_TIMEOUT没法设置,这个参