基于C语言实现的贪吃蛇游戏完整实例代码_C 语言

本文以实例的形式讲述了基于C语言实现的贪吃蛇游戏代码，这是一个比较常见的游戏，代码备有比较详细的注释，对于读者理解有一定的帮助。

贪吃蛇完整实现代码如下：

#include <graphics.h>
#include <conio.h>
#include <stdlib.h>
#include <dos.h>
#define NULL 0
#define UP  18432
#define DOWN 20480
#define LEFT 19200
#define RIGHT 19712
#define ESC  283
#define ENTER 7181
struct snake
{int centerx;
 int centery;
 int newx;
 int newy;
 struct snake *next;
};
struct snake *head;

int grade=60;                     /*控制速度的*******/
int a,b;                        /* 背静遮的 位置*/
void *far1,*far2,*far3,*far4;             /* 蛇身指针 背静遮的指针 虫子*/
int size1,size2,size3,size4;              /* **全局变量**/
int ch=RIGHT;                     /**************存按键 开始蛇的方向为RIGHT***********/
int chy=RIGHT;
int flag=0;                       /*********判断是否退出游戏**************/
int control=4;                     /***********判断上次方向和下次方向不冲突***/
int nextshow=1;                     /*******控制下次蛇身是否显示***************/
int scenterx;                      /***************随即矩形中心坐标***************/
int scentery;
int sx;                         /*******在a b 未改变前 得到他们的值 保证随机矩形也不在此出现*******/
int sy;                

/************************蛇身初始化**************************/
void snakede()
{
 struct snake *p1,*p2;
 head=p1=p2=(struct snake *)malloc(sizeof(struct snake));
 p1->centerx=80;
 p1->newx=80;
 p1->centery=58;
 p1->newy=58;
 p1=(struct snake *)malloc(sizeof(struct snake));
 p2->next=p1;
 p1->centerx=58;
 p1->newx=58;
 p1->centery=58;
 p1->newy=58;
 p1->next=NULL;
}
/*******************end*******************/
void welcome()            /*************游戏开始界面　，可以选择　速度**********/
{
 int key;
 int size;
 int x=240;
 int y=300;
 int f;
 void *buf;
 setfillstyle(SOLID_FILL,BLUE);
 bar(98,100,112,125);
 setfillstyle(SOLID_FILL,RED);
 bar(98,112,112,114);
 setfillstyle(SOLID_FILL,GREEN);
 bar(100,100,110,125);
 size=imagesize(98,100,112,125);
 buf=malloc(size);
 getimage(98,100,112,125,buf);
 cleardevice();

 setfillstyle(SOLID_FILL,BLUE);
 bar(240,300,390,325);
 outtextxy(193,310,"speed:");
 setfillstyle(SOLID_FILL,RED);
 bar(240,312,390,314);
 setcolor(YELLOW);
 outtextxy(240,330,"DOWN");
 outtextxy(390,330,"UP");
 outtextxy(240,360,"ENTER to start..." );
 outtextxy(270,200,"SNAKE");
 fei(220,220);
 feiyang(280,220);
 yang(340,220);
 putimage(x,y,buf,COPY_PUT);
 setcolor(RED);
 rectangle(170,190,410,410);
 while(1)
 { if(bioskey(1))                      /********8选择速度部分************/
  key=bioskey(0);
  switch(key)
  {
    case ENTER:
   f=1;
   break;
    case DOWN:
    if(x>=240)
    { putimage(x-=2,y,buf,COPY_PUT);
   grade++;
   key=0;
   break;
    }
 case UP:
    if(x<=375)
    { putimage(x+=2,y,buf,COPY_PUT);
   grade--;
    key=0;
   break;
    }
   }

   if (f==1)
   break;
 }                           /********** end  ****************/ 

 free(buf);
 } 

/*************************随即矩形*****************/
/***********当nextshow 为1的时候才调用此函数**********/

void ran()
{ int nx;
 int ny;
 int show;         /**********控制是否显示***********/
 int jump=0;
 struct snake *p;
 p=head;
 if(nextshow==1)      /***********是否开始随机产生***************/
  while(1)
  {show=1;
  randomize();
  nx=random(14);
  ny=random(14);
  scenterx=nx*22+58;
  scentery=ny*22+58;
   while(p!=NULL)
   {
    if(scenterx==p->centerx&&scentery==p->centery||scenterx==sx&&scentery==sy)
  {show=0;
  jump=1;
  break;
  }
    else
  p=p->next;
   if(jump==1)
  break;
  }
 if(show==1)
  {putimage(scenterx-11,scentery-11,far3,COPY_PUT);
  nextshow=0;
  break;
  }

 }
}

/***********过关动画**************/
void donghua()
{ int i;
 cleardevice();
 setbkcolor(BLACK);
 randomize();
 while(1)
 {for(i=0;i<=5;i++)
 {putpixel(random(640),random(80),13);
  putpixel(random(640),random(80)+80,2);
  putpixel(random(640),random(80)+160,3);
  putpixel(random(640),random(80)+240,4);
  putpixel(random(640),random(80)+320,1);
  putpixel(random(640),random(80)+400,14);
 }
  setcolor(YELLOW);
  settextstyle(0,0,4);
  outtextxy(130,200,"Wonderful!!");
  setfillstyle(SOLID_FILL,10);
  bar(240,398,375,420);
  feiyang(300,400);
  fei(250,400);
  yang(350,400);
  if(bioskey(1))
  if(bioskey(0)==ESC)
 {
      flag=1;
  break;
 }
 }
}

/*************************end************************/

/***********************初始化图形系统*********************/
void init()
{int a=DETECT,b;
 int i,j;
 initgraph(&a,&b,"");
}
/***************************end****************************/ 

/***画立体边框效果函数******/
void tline(int x1,int y1,int x2,int y2,int white,int black)
{ setcolor(white);
 line(x1,y1,x2,y1);
 line(x1,y1,x1,y2);
 setcolor(black);
 line(x2,y1,x2,y2);
 line(x1,y2,x2,y2);
 }
/****end*********/

/*************飞洋标志**********/
int feiyang(int x,int y)
{int feiyang[18][18]={ {0,0,0,0,0,0,1,1,1,1,1,1,0,1,1,0,0,0},
 {0,0,0,0,0,1,1,1,0,0,1,1,1,1,1,0,0,0},
 {0,0,0,0,1,1,1,0,0,0,0,0,1,1,1,0,0,0},
 {0,0,0,1,1,1,0,0,0,0,0,0,0,1,1,0,0,0},
 {0,0,0,1,1,0,0,0,0,0,0,1,1,0,0,0,0,0},
 {0,0,1,1,0,0,0,0,0,0,1,1,1,0,0,0,0,0},
 {0,0,1,1,0,1,1,1,1,1,1,0,0,0,0,0,0,0},
 {0,0,1,1,1,1,1,0,0,1,0,0,1,1,0,0,0,0},
 {0,0,1,1,1,0,0,0,0,1,0,1,1,1,0,0,0,0},
 {0,0,1,1,0,1,1,1,0,1,1,1,0,0,0,0,0,0},
 {0,0,1,1,0,0,0,1,0,0,1,1,0,0,0,0,0,0},
 {0,0,1,1,0,0,0,1,1,0,0,1,1,0,0,1,0,0},
 {0,0,1,1,1,0,0,1,1,0,0,1,1,0,0,1,0,0},
 {0,0,1,1,1,1,0,1,1,1,1,1,1,0,1,1,0,0},
 {0,0,0,1,1,1,0,1,1,1,1,1,0,0,1,0,0,0},
 {0,0,0,0,1,1,1,0,0,0,0,0,0,1,1,0,0,0},
 {0,0,0,0,0,1,1,1,0,0,0,0,1,1,0,0,0,0},
 {0,0,0,0,0,1,1,1,1,1,1,1,1,0,0,0,0,0}};
 int i,j;
for(i=0;i<=17;i++)
 for(j=0;j<=17;j++)
 {if (feiyang[i][j]==1)
 putpixel(j+x,i+y,RED);
 }
}

/********"飞"字*************/
int fei(int x,int y)
{int fei[18][18]={{1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0},
{0,1,1,1,1,1,1,1,1,1,1,0,0,0,0,0,0,0},
 {0,1,1,1,0,0,0,0,1,1,1,0,0,0,0,0,0,0},
 {0,0,0,0,0,0,0,0,0,1,1,0,0,1,0,0,0,0},
 {0,0,0,0,0,0,0,0,0,1,1,0,0,1,1,0,0,0},
 {0,0,0,0,0,0,0,0,0,1,1,0,1,1,0,0,0,0},
 {0,0,0,0,0,0,0,0,0,1,1,1,1,0,0,0,0,0},
 {0,0,0,0,0,0,0,0,0,1,1,1,1,0,0,0,0,0},
 {0,0,0,0,0,0,0,0,0,1,1,0,1,1,1,0,0,0},
 {0,0,0,0,0,0,0,0,0,0,1,1,0,0,1,1,0,0},
 {0,0,0,0,0,0,0,0,0,0,0,1,1,0,1,1,0,0},
 {0,0,0,0,0,0,0,0,0,0,0,1,1,0,0,0,0,0},
 {0,0,0,0,0,0,0,0,0,0,0,0,1,1,0,0,0,0},
 {0,0,0,0,0,0,0,0,0,0,0,0,1,1,0,0,0,1},
 {0,0,0,0,0,0,0,0,0,0,0,0,0,1,1,0,1,1},
 {0,0,0,0,0,0,0,0,0,0,0,0,0,1,1,1,1,1},
 {0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,1,1,0},
 {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,1,0}};
int i,j;
for(i=0;i<=17;i++)
  for(j=0;j<=17;j++)
  {if (fei[i][j]==1)
    putpixel(j+x,i+y,BLUE);
  }
} 

/*********"洋"字**************/ 

int yang(int x,int y)
{
int yang[18][18]={{0,0,0,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0},
{1,1,0,0,0,0,1,1,1,0,0,0,1,1,0,0,0,0},
{0,1,1,1,0,0,0,1,1,1,0,1,1,0,0,0,0,0},
{0,0,1,1,0,0,0,0,0,1,1,1,0,0,0,1,0,0},
{0,0,0,1,0,1,1,1,1,1,1,1,1,1,1,1,1,0},
{0,0,0,1,0,0,0,0,0,0,1,0,0,0,0,0,0,0},
{1,1,1,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0},
{0,1,1,1,0,0,0,0,0,0,1,0,0,1,0,0,0,0},
{0,0,1,1,0,0,0,1,1,1,1,1,1,1,1,0,0,0},
{0,0,0,1,0,0,0,0,0,0,1,0,0,0,0,0,0,0},
{0,0,0,1,0,0,1,0,0,0,1,0,0,0,0,0,0,0},
{0,0,0,0,0,1,1,0,0,0,1,0,0,0,0,1,1,0},
{0,0,0,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1},
{0,0,0,1,1,0,0,0,0,0,1,0,0,0,0,0,0,0},
{1,1,1,1,0,0,0,0,0,0,1,0,0,0,0,0,0,0},
{0,1,1,1,0,0,0,0,0,0,1,0,0,0,0,0,0,0},
{0,0,1,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0},
{0,0,1,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0}};
int i,j;
  for(i=0;i<=17;i++)
    for(j=0;j<=17;j++)
      {if (yang[i][j]==1)
         putpixel(j+x,i+y,BLUE);
       }
 } 

/******************主场景**********************/
int bort()
{ int a;
 setfillstyle(SOLID_FILL,15);
 bar(49,49,71,71);
 setfillstyle(SOLID_FILL,BLUE);
 bar(50,50,70,70);
 size1=imagesize(49,49,71,71);
 far1=(void *)malloc(size1);
 getimage(49,49,71,71,far1);
 cleardevice();
 setfillstyle(SOLID_FILL,12);
 bar(49,49,71,71);
 size2=imagesize(49,49,71,71);
 far2=(void *)malloc(size2);
 getimage(49,49,71,71,far2);
 setfillstyle(SOLID_FILL,12);
 bar(49,49,71,71);
 setfillstyle(SOLID_FILL,GREEN);
 bar(50,50,70,70);
 size3=imagesize(49,49,71,71);
 far3=(void *)malloc(size3);
 getimage(49,49,71,71,far3);
 cleardevice();                    /*取蛇身节点  背景节点 虫子节点end*/
 setbkcolor(8);
 setfillstyle(SOLID_FILL,GREEN);
 bar(21,23,600,450);
 tline(21,23,600,450,15,8);              /***开始游戏场景边框 立体效果*******/
 tline(23,25,598,448,15,8);
 tline(45,45,379,379,8,15);
 tline(43,43,381,381,8,15);
 tline(390,43,580,430,8,15);
 tline(392,45,578,428,8,15);
 tline(412,65,462,85,15,8);
 tline(410,63,464,87,15,8);
 tline(410,92,555,390,15,8);
 tline(412,94,553,388,15,8);
 tline(431,397,540,420,15,8);
 tline(429,395,542,422,15,8);
 tline(46,386,377,428,8,15);
 tline(44,384,379,430,8,15);
 setcolor(8);
 outtextxy(429,109,"press ENTER ");
 outtextxy(429,129,"---to start");     /*键盘控制说明*/
 outtextxy(429,169,"press ESC ");
 outtextxy(429,189,"---to quiet");
 outtextxy(469,249,"UP");
 outtextxy(429,289,"LEFT");
 outtextxy(465,329,"DOWN");
 outtextxy(509,289,"RIGHT");
 setcolor(15);
 outtextxy(425,105,"press ENTER ");
 outtextxy(425,125,"---to start");
 outtextxy(425,165,"press ESC ");
 outtextxy(425,185,"---to quiet");
 outtextxy(465,245,"UP");
 outtextxy(425,285,"LEFT");
 outtextxy(461,325,"DOWN");
 outtextxy(505,285,"RIGHT");       /*******end*************/ 

 setcolor(8);
 outtextxy(411,52,"score");
 outtextxy(514,52,"left");
 setcolor(15);
 outtextxy(407,48,"score");
 outtextxy(510,48,"left");

 size4=imagesize(409,62,465,88);       /****分数框放到内存********/
 far4=(void *)malloc(size4);
 getimage(409,62,465,88,far4);
 putimage(500,62,far4,COPY_PUT);      /*******输出生命框***********/
 setfillstyle(SOLID_FILL,12);
 setcolor(RED);
 outtextxy(415,70,"0");         /***************输入分数为零**********/
  outtextxy(512,70,"20");          /*************显示还要吃 的虫子的数目*********/
  bar(46,46,378,378);
  feiyang(475,400);
  fei(450,400);
  yang(500,400);
  outtextxy(58,390,"mailto:jiangzhiliang002@tom.com");
  outtextxy(58,410,"snake game");
  outtextxy(200,410,"made by yefeng");
 while(1)
 { if(bioskey(1))
  a=bioskey(0);
  if(a==ENTER)
 break;
 }

}
/******************gameover()******************/

 void gameover()
{ char *p="GAME OVER";
 int cha;
 setcolor(YELLOW);
 settextstyle(0,0,6);
 outtextxy(100,200,p);

  while(1)
 {if(bioskey(1))
  cha=bioskey(0);
  if(cha==ESC)
  {flag=1;
  break;
  }
 } 

}
/***********显示蛇身**********************/
void snakepaint()
{struct snake *p1;
 p1=head;
 putimage(a-11,b-11,far2,COPY_PUT);
 while(p1!=NULL)
 {putimage(p1->newx-11,p1->newy-11,far1,COPY_PUT);
 p1=p1->next;
 }
}
/****************end**********************/
/*********************蛇身刷新变化 游戏关键部分 *******************/
void snakechange()
{struct snake *p1,*p2,*p3,*p4,*p5;
 int i,j;
 static int n=0;
 static int score;
 static int left=20;
 char sscore[5];
 char sleft[1];
 p2=p1=head;
 while(p1!=NULL)
 { p1=p1->next;
  if(p1->next==NULL)
  {a=p1->newx;
  b=p1->newy;           /************记录最后节点的坐标************/
  sx=a;
  sy=b;
  }
  p1->newx=p2->centerx;
  p1->newy=p2->centery;
  p2=p1;
 }
p1=head;
while(p1!=NULL)
{p1->centerx=p1->newx;
 p1->centery=p1->newy;
 p1=p1->next;
}

/********判断按键方向*******/
if(bioskey(1))
 { ch=bioskey(0);
   if(ch!=RIGHT&&ch!=LEFT&&ch!=UP&&ch!=DOWN&&ch!=ESC)   /********chy为上一次的方向*********/
   ch=chy;
 }
 switch(ch)
 {
  case LEFT: if(control!=4)
 {head->newx=head->newx-22;
         head->centerx=head->newx;
  control=2;
  if(head->newx<47)
         gameover();
     }
        else
     { head->newx=head->newx+22;
          head->centerx=head->newx;
   control=4;
   if(head->newx>377)
   gameover();
     }
  chy=ch;
  break;
  case DOWN:
        if(control!=1)
     { head->newy=head->newy+22;
          head->centery=head->newy;
   control=3;
   if(head->newy>377)
   gameover();
         }
         else
       { head->newy=head->newy-22;
    head->centery=head->newy;
           control=1;
    if(head->newy<47)
    gameover();
          }
         chy=ch;
         break;
  case RIGHT: if(control!=2)
  { head->newx=head->newx+22;
          head->centerx=head->newx;
          control=4;
   if(head->newx>377)
      gameover();
         }
         else
      { head->newx=head->newx-22;
          head->centerx=head->newx;
          control=2;
   if(head->newx<47)
   gameover();
  }
         chy=ch;
         break;
  case UP: if(control!=3)
    { head->newy=head->newy-22;
        head->centery=head->newy;
        control=1;
    if(head->newy<47)
    gameover();
       }
       else
    { head->newy=head->newy+22;
        head->centery=head->newy;
        control=3;
 if(head->newy>377)
        gameover();
        }
        chy=ch;
        break; 

  case ESC:
       flag=1;
       break;
 } 

/* if 判断是否吃蛇*/
if(flag!=1)
{ if(head->newx==scenterx&&head->newy==scentery)
 { p3=head;
   while(p3!=NULL)
   { p4=p3;
 p3=p3->next;
   }
  p3=(struct snake *)malloc(sizeof(struct snake));
  p4->next=p3;
  p3->centerx=a;
  p3->newx=a;
  p3->centery=b;
  p3->newy=b;
  p3->next=NULL;
  a=500;
  b=500;
  putimage(409,62,far4,COPY_PUT);  /********** 分数框挡住**************/
  putimage(500,62,far4,COPY_PUT);  /*********把以前的剩下虫子的框挡住********/
  score=(++n)*100;
  left--;
  itoa(score,sscore,10);
  itoa(left,sleft,10);
  setcolor(RED);
  outtextxy(415,70,sscore);
  outtextxy(512,70,sleft);
  nextshow=1;
  if(left==0)           /************判断是否过关**********/
  donghua();             /*******如果过关，播放过关动画*********************/
 }
 p5=head;       /*********************判断是否自杀***************************/
 p5=p5->next;
 p5=p5->next;
 p5=p5->next;
 p5=p5->next;      /****从第五个节点判断是否自杀************/
 while(p5!=NULL)
 {if(head->newx==p5->centerx&&head->newy==p5->centery)
  { gameover();
    break;
  }
   else
  p5=p5->next;
 }
 }
}
/************snakechange()函数结束*******************/ 

/*****************************主函数******************************************/
int main()
{ int i;
 init();       /**********初始化图形系统**********/
 welcome();      /*********8欢迎界面**************/
 bort();       /*********主场景***************/
 snakede();      /**********连表初始化**********/
 while(1)
 { snakechange();
  if(flag==1)
  break;
  snakepaint();
  ran();
  for(i=0;i<=grade;i++)
  delay(3000);
  }
 free(far1);
 free(far2);
 free(far3);
 free(far4);
 closegraph();
 return 0;
}

以上是小编为您精心准备的的内容，在的博客、问答、公众号、人物、课程等栏目也有的相关内容，欢迎继续使用右上角搜索按钮进行搜索c语言
，游戏
，实现
贪吃蛇
贪吃蛇c语言代码、贪吃蛇c语言程序、c语言贪吃蛇、用c语言编写贪吃蛇、c语言贪吃蛇源代码，以便于您获取更多的相关知识。

时间： 2024-03-17 07:49:58

基于C语言实现的贪吃蛇游戏完整实例代码_C 语言的相关文章

基于C语言实现五子棋游戏完整实例代码_C 语言

本文实例讲述了基于C语言实现五子棋游戏的方法,代码备有比较完整的注释,可以帮助读者更好的加以理解. 五子棋游戏代码如下: /* * 使用键盘的上下左右键移动棋盘,空格键表示下棋,ESC键退出程序 */ #include <stdio.h> #include <stdlib.h> #include <bios.h> #include <graphics.h> #include<malloc.h> /* * 对应键盘键的十六进制数字 */ #defi

C语言之单向链表详解及实例代码_C 语言

1,单向链简洁. 单向链表(单链表)是链表的一种,其特点是链表的链接方向是单向的,对链表的访问要通过顺序读取从头部开始:链表是使用指针进行构造的列表:又称为结点列表,因为链表是由一个个结点组装起来的:其中每个结点都有指针成员变量指列表中的下一个结点:列表是由结点构成,由head指针指向第一个成为表头的结点而终止于最后一个指向nuLL的指针: 2,例子要求: 根据示例代码中的例子,完成单向链表(single linked list)中的以字符串为数据的链表的插入.删除以及查找,并支持单向链表的反转

C语言奇偶排序算法详解及实例代码_C 语言

C语言奇偶排序算法奇偶排序,或奇偶换位排序,或砖排序,是一种相对简单的排序算法,最初发明用于有本地互连的并行计算.这是与冒泡排序特点类似的一种比较排序.该算法中,通过比较数组中相邻的(奇-偶)位置数字对,如果该奇偶对是错误的顺序(第一个大于第二个),则交换.下一步重复该操作,但针对所有的(偶-奇)位置数字对.如此交替进行下去. 使用奇偶排序法对一列随机数字进行排序的过程处理器数组的排序在并行计算排序中,每个处理器对应处理一个值,并仅有与左右邻居的本地互连.所有处理器可同时与邻居进行比较.交

C语言文件操作解析详解及实例代码_C 语言

C语言文件操作解析在文件操作中除了打开操作以及读写操作,还有几种比较常见的操作.下面介绍一下这些操作中涉及到的函数. 一.移动位置指针的函数 rewind函数和fseek函数,这两个函数的原型是: void rewind(FILE *fp); 将位置指针移动到文件首 int fseek(FILE *fp,long int offset,int origin); 将位置指针移动到距离origin的offset字节数的位置其中对于fseek函数中的

贪吃蛇游戏C++命令行版实例代码_C 语言

本文实例讲述了贪吃蛇游戏C++命令行版的实现代码,是非常经典的游戏.分享给大家供大家参考.具体实现方法如下: 众所周知,贪吃蛇游戏是经典的计算机游戏. 游戏描述如下: 1. 贪吃蛇可以自动直线前进,或者玩家可以通过方向键操纵贪吃蛇上下左右前进,每次前进一格. 2. 贪吃蛇在规定的区域内活动,当: ①贪吃蛇触碰到墙壁时: ②贪吃蛇的蛇头触碰到蛇身或者蛇尾时: ③玩家的键盘输入不是方向键时: 命令行显示"Game Over!"并且退出游戏. 3. 贪吃蛇活动的区域内每次随机产生一颗&quo

C语言循环结构与时间函数用法实例教程_C 语言

本文实例展示了C语言循环结构与时间函数用法,对于C语言的学习来说是非常不错的参考借鉴材料.分享给大家供大家参考之用.具体如下: 完整实例代码如下: /********************************************** ** <Beginning C 4th Edition> Notes codes ** Created by Goopand ** Compiler: gcc 4.7.0 *****************************************

C语言变量类型与输出控制用法实例教程_C 语言

本文实例讲述了C语言变量类型与输出控制用法,有助于读者很好的对其进行总结与归纳.该实例分享给大家供大家参考借鉴之用.具体如下: 完整实例代码如下: /********************************************** **<Beginning C 4th Edition>Notes codes ** Created by Goopand ** Compiler: gcc 4.7.0 *******************************************

C/C++语言实现随机生成迷宫游戏的实例代码

迷宫相信大家都走过,毕竟书本啊啥啥啥的上面都会有迷宫,主要就是考验你的逻辑思维.那么我们学习C/C++也是需要学习到逻辑思维方式的,那今天我就来分享一下,如何用C/C++打造一个简单的随机迷宫游戏.(代码的话我只截取了如何创建迷宫的代码,如果想要全套代码的话可以加群:558502932,群内有很多C/C++学习资料提供学习,大家一起交流进步) 完整版的迷宫游戏效果如下: 代码如下: //创建迷宫 voidCreateMaze(intx,inty) { //定义4个方向 intdir[4][2]

C++ 继承详解及实例代码_C 语言

C++继承可以是单一继承或多重继承,每一个继承连接可以是public,protected,private也可以是virtual或non-virtual.然后是各个成员函数选项可以是virtual或non-virtual或pure virtual.本文仅仅作出一些关键点的验证. public继承,例如下: 1 class base 2 {...} 3 class derived:public base 4 {...} 如果这样写,编译器会理解成类型为derived的对象同时也是类型为base的对象