apache
文章简介：Apache最新官方配置文件中文版。帮忙web服务器管理员更方便的对Apache进行配置。
#
# Based upon the NCSA server configuration files originally by Rob McCool.
#参照NCSA服务器的配置文件，原版由Rob McCool发布
#
# This is the main Apache server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs-2.0/> for detailed information about
# the directives.
#这是Apache server的主配置文件. 它包含配置指令，来指示服务器
#请参考 http://httpd.apache.org/docs-2.0 了解关于指令的详细信息
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
#不要仅仅是阅读本指令，而应该理解指令做了什么。在这里仅起提示的作用。
#如果你不清楚请参阅在线文档。特别提示
# The configuration directives are grouped into three basic sections:
#配置文件批令分为三个基本组
# 1. Directives that control the operation of the Apache server process as a
# whole (the 'global environment').
# 1. 控制Apache server的全局操作的指令(全局环境变量).
# 2. Directives that define the parameters of the 'main' or 'default' server,
# which responds to requests that aren't handled by a virtual host.
# These directives also provide default values for the settings
# of all virtual hosts.
# 2.配置主服务或者默认服务的指令，它针对那些被虚拟主机以外的请求作出响应.
# 它也包含虚拟主机的一些默认参数
# 3. Settings for virtual hosts, which allow Web requests to be sent to
# different IP addresses or hostnames and have them handled by the
# same Apache server process.
# 3. 虚拟主机设置，这使得发往不同的ip或者主机名的请求可以被子同一个Apache服务# 器处理
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "C:/Program Files/Apache Group/Apache2" will be interpreted by the
# server as "C:/Program Files/Apache Group/Apache2/logs/foo.log".
#配置和日志文件名：如果你所指定的文件名以”/”（在Win32中以盘符：/）开头，服务器将以绝对路径来处理。如果不以”/”开头，则以相对于ServerRoot不解释，所以对于logs/foo.log来讲，当ServerRoot为"C:/Program Files/Apache Group/Apache2”时，则指的是
C:/Program Files/Apache Group/Apache2/logs/foo.log文件
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
注意，在文件名的定义中，必须用正斜杠，而不是反斜杠，如c:/apache而不是c:\apache
# If a drive letter is omitted, the drive on which Apache.exe is located
# will be used by default. It is recommended that you always supply
# an explicit drive letter in absolute paths, however, to avoid
# confusion.
#如果省略了盘符，则以Apache.exe所在的盘符为默认值
建议在绝对路径中永远使用显式的盘符，这样有助于消除误解
### Section 1: Global Environment
#第一部分全局环境
#
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
#本部分的指令将影响整个Apache服务器，例如它所能处理的并发请求数或者它在哪里能够找到其配置文件
#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# ServerRoot: 服务器的配置，错误和日志文件的根目录
# NOTE! If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the LockFile documentation (available
# at <URL:http://httpd.apache.org/docs-2.0/mod/mpm_common.html#lockfile>);
# you will save yourself a lot of trouble.
#注意：如果将其保存到NFS上或者网络上mounted的文件系统上，然后应该阅读LockFile文档，http://httpd.apache.org/docs-2.0/mod/mpm_common.html#lockfile，将能解决你的很多麻烦.
# Do NOT add a slash at the end of the directory path.
#不要在目录的末尾加上斜杠
ServerRoot "C:/Program Files/Apache Group/Apache2"
ServerRoot:根目录
#
# ScoreBoardFile: File used to store internal server process information.
# If unspecified (the default), the scoreboard will be stored in an
# anonymous shared memory segment, and will be unavailable to third-party
# applications.
ScoreBoardFile: 保存服务器内部的处理信息
如果未定议(默认状态)，scoreboard将被保存在匿名的共享内存段中，并且对于第三方来讲，是不可获得的
# If specified, ensure that no two invocations of Apache share the same
# scoreboard file. The scoreboard file MUST BE STORED ON A LOCAL DISK.
#如果已定义，应确保Apache的两个调用不能共享同一个scoreboard. Scoreboard文件必须存放在可分配的磁盘上
#ScoreBoardFile logs/apache_runtime_status
#
# PidFile: The file in which the server should record its process
# identification number when it starts.
#PidFile:当服务器起努时，服务器需要将其进程ID号存放在此文件中
PidFile logs/httpd.pid
#
# Timeout: The number of seconds before receives and sends time out.
#Timeout:接收和发送数据的超时设置，秒数
Timeout 300
#
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
#KeepAlive: 是否支持持久联接（而不是每个请求建一个连接）,设off关闭此功能
KeepAlive On
#
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
#MaxKeepAliveRequests:在持久连接期间，所允许的最大请求数量。设为0表示不作限制
建议设为较高的数，以提高性能
MaxKeepAliveRequests 100
#
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
#KeepAliveTimeout:在同一个客户连接中，等待下一个请求的等待时间。
KeepAliveTimeout 15
##
## Server-Pool Size Regulation (MPM specific)
## 常规Server-Pool服务器池的大小(每分钟M数)
# WinNT MPM WinNT 的MPM
# ThreadsPerChild: constant number of worker threads in the server process
ThreadPerChild:服务器进程中工作的线程数量
# MaxRequestsPerChild: maximum number of requests a server process serves
每个服务进程的最大请求数
<IfModule mpm_winnt.c>
ThreadsPerChild 250
MaxRequestsPerChild 0
</IfModule>
#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#Listen:允许你将Apache绑定到指定的IP地址或端口，而不是默认端口，请同时参考<VirtualHost>指令
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses (0.0.0.0)
#像下面那样指定侦听的IP地址，防止Apache抢占所有绑定的IP地址
#Listen 12.34.56.78:80
Listen 80
#
# Dynamic Shared Object (DSO) Support
#动态共享对象支持DSO
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#为了能够使用模块功能，模块通常以DSO的方式构建，你应该在下面使用LoadModule行，使得能够在使用前获得指令的功能。静态编译模块（在httpd-1中所列举的）不需要在此装载
# Example:
# LoadModule foo_module modules/mod_foo.so
#
LoadModule access_module modules/mod_access.so
LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_module modules/mod_auth.so
#LoadModule auth_anon_module modules/mod_auth_anon.so
#LoadModule auth_dbm_module modules/mod_auth_dbm.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule cgi_module modules/mod_cgi.so
#LoadModule dav_module modules/mod_dav.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule dir_module modules/mod_dir.so
LoadModule env_module modules/mod_env.so
#LoadModule expires_module modules/mod_expires.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule headers_module modules/mod_headers.so
LoadModule imap_module modules/mod_imap.so
LoadModule include_module modules/mod_include.so
#LoadModule info_module modules/mod_info.so
LoadModule isapi_module modules/mod_isapi.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule mime_module modules/mod_mime.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
#LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
#LoadModule proxy_http_module modules/mod_proxy_http.so
#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule negotiation_module modules/mod_negotiation.so
#LoadModule rewrite_module modules/mod_rewrite.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule speling_module modules/mod_speling.so
#LoadModule status_module modules/mod_status.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule userdir_module modules/mod_userdir.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
#LoadModule ssl_module modules/mod_ssl.so
#
# ExtendedStatus controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information (ExtendedStatus
# Off) when the "server-status" handler is called. The default is Off.
#扩展状态控制Apache是否产生完整的状态信息（设为on产生全部），如果设为Off则产生基本的信息，当与server-status头有关，默认值为Off
#ExtendedStatus On
### Section 2: 'Main' server configuration
#第二部分：主服务配置
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#本节中指令的设置值，将被主服务所使用，主服务响应那些没有被<VirtualHost>所处理的请求，这些值也为<VirtualHost>容器提供了默认值，你可以在后面的文件中定义
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
所有这些指令将出现在<VirtualHost>容器中，这些设定值将在定义virtual host时被覆写。
#
#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. admin@your-domain.com
# ServerAdmin：你的地址，当系统故障时，可以给你发email。此地址出现在那些由服务器生成的页面上，如出错文档。例如：admin@your-domain.com
ServerAdmin webmaster@moers.com
#
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#ServerNaem定义了server名称和端口号，用以标明自己的身份。通常可以自动定义，建议显式地定义，避免起动时出错
# If this is not set to valid DNS name for your host, server-generated
# redirections will not work. See also the UseCanonicalName directive.
#如果没有正确定义主机的DNS,服务器产生的重定向将不会工作，同时参考UseCanonicalName指令。
# If your host doesn't have a registered DNS name, enter its IP address here.
# You will have to access it by its address anyway, and this will make
# redirections work in a sensible way.
#如果你没有注册DNS名字，请在这里输入IP地址。
你可以在任何情况下使用ip地址，这也使用得重定向变得敏感
ServerName www.moers.com:80
#
# UseCanonicalName: Determines how Apache constructs self-referencing
# URLs and the SERVER_NAME and SERVER_PORT variables.
# When set "Off", Apache will use the Hostname and Port supplied
# by the client. When set "On", Apache will use the value of the
# ServerName directive.
#UseCanonicalName:决定Apaceh如何构建自定参考URL,和SERVER_NAME及SERVER_PORT变量
当设为Off时，Apache将使用客户端给出的域名和端口。当设为On时，Apache将使用ServerName指令
UseCanonicalName Off
#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#DocumentRoot:服务器文档放置目录。在默认情形下，所有的请求都从这里开始，除了记号和别名将改指它处以外。
DocumentRoot "C:/Program Files/Apache Group/Apache2/htdocs"
#
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
#每个可供Apache访问的目录，可以配置成允许或禁止哪些服务和特征（包括其子目录）
# First, we configure the "default" to be a very restrictive set of
# features.
#首先，我们定义一个默认的非常严格的配置
<Directory />
Options FollowSymLinks
AllowOverride None
</Directory>
#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#注意，从这一点往前，你必须许可某些特殊的功能，所以如果某些功能未能如你所愿，要确保你在在下述中启用了该功能。
#
# This should be changed to whatever you set DocumentRoot to.
# 这将改变你对DocumentRoot的设置
<Directory "C:/Program Files/Apache Group/Apache2/htdocs">
#
# Possible values for the Options directive are "None", "All",
# or any combination of:
可能的值为None,All或者任意组合
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# 索引包括FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
#注意MultiViews被显式地Options All,
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs-2.0/mod/core.html#options
# for more information.
#选项指令既复杂又重要，请参阅http://httpd.apache.org/docs-2.0/mod/core.html#options了解详情
Options Indexes FollowSymLinks
#
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
#AllowOverride 控制什么指令能够加入到.htaccess中，可以是All,None,或者组合关键字
AllowOverride None
#
# Controls who can get stuff from this server.
#控制谁可以可以访问此服务
Order allow,deny
Allow from all
</Directory>
#
# UserDir: The name of the directory that is appended onto a user's home
# directory if a ~user request is received. Be especially careful to use
# proper, forward slashes here. On Windows NT, "Personal/My Website"
# is a more appropriate choice.
# UserDir: 用户的home的名称，当接到到~user的请求时。
请小心正确使用”/”. 在WinNT上，”Personal/My Website”是更合适的选择
UserDir "My Documents/My Website"
#
# Control access to UserDir directories. The following is an example
# for a site where these directories are restricted to read-only.
#控制UserDir目录，以下是一个例子，这个目录是只读的
# You must correct the path for the root to match your system's configured
# user directory location, e.g. "C:/WinNT/profiles/*/My Documents/My Website"
# or whichever, as appropriate.
#你必须更正root目录，与系统设置相配，如用户目录是C:/WinNT/profiles/*/My Documents/My Website或者其它合适的
#<Directory "C:/Documents and Settings/*/My Documents/My Website">
# AllowOverride FileInfo AuthConfig Limit
# Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
# <Limit GET POST OPTIONS PROPFIND>
# Order allow,deny
# Allow from all
# </Limit>
# <LimitExcept GET POST OPTIONS PROPFIND>
# Order deny,allow
# Deny from all
# </LimitExcept>
#</Directory>
#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#DirectoryIndex: Apache服务器将要以一个目录的形式响应服务
# The index.html.var file (a type-map) is used to deliver content-
# negotiated documents. The MultiViews Option can be used for the
# same purpose, but it is much slower.
#index.html变量文件（一种映射）将直接传送内容。MultiViews选项可以用于同样的目的，但是要慢得多
DirectoryIndex index.html index.html.var
#
# AccessFileName: The name of the file to look for in each directory
# for additional configuration directives. See also the AllowOverride
# directive.
#AccessFileName: 用来查找各个目录下额外的配置指令的配置文件名，同时参考AllowOverride(允许重载)指令
#Acce
AccessFileName .htaccess
#
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
#下面两行，阻址Web客户端访问 .htaccess和htpasswd(访问设定和密码)的文件
#
<Files ~ "^\.ht">
Order allow,deny
Deny from all
</Files>
#
# TypesConfig describes where the mime.types file (or equivalent) is
# to be found.
# TypesConfig，描述在何处找到mime型别
TypesConfig conf/mime.types
#
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
如果服务器不能确定文档的型别，将使用默认的MIME型别,例如根据扩展名
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#如果你的服务器主要包括text/html文档，”text/plain”就是一个好的取值。如果你的大多数内容是binary(二进制)的，如应用程序或图片，你可能希望使用application/octet-stream，使得浏览器试图显示二进制数据，尽管它们是文本
DefaultType text/plain
#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
# mod_mime_magic模块，允许服务器根据内容提示来识别文件型别。MIMEMagicFile指令告知模块“内容提示”应到何处找。
<IfModule mod_mime_magic.c>
MIMEMagicFile conf/magic
</IfModule>
#
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
HostNameLookups: 客户日志或者仅其IP地址，如www.apache.org(on) 或者204.62.129.132
(off).默认为值设为off比较好，如果希望将此置为on将意味着第一次客户请求都至少要查询一次nameserver.
#
HostnameLookups Off
#
# EnableMMAP: Control whether memory-mapping is used to deliver
# files (assuming that the underlying OS supports it).
# The default is on; turn this off if you serve from NFS-mounted
# filesystems. On some systems, turning it off (regardless of
# filesystem) can improve performance; for details, please see
# http://httpd.apache.org/docs-2.0/mod/core.html#enablemmap
# EnableMMAP: 控制是否通过内存映射的方式传送文件(须得操作系统支持)
默认值为on; 如果你使用NSF加载的文件系统（通常在linux下）,应置为off. 在某些系统上，置off,不管使用什么文件系统，能够提高效率，详细情况，请参阅文档
#EnableMMAP off
#
# EnableSendfile: Control whether the sendfile kernel support is
# used to deliver files (assuming that the OS supports it).
# The default is on; turn this off if you serve from NFS-mounted
# filesystems. Please see
# http://httpd.apache.org/docs-2.0/mod/core.html#enablesendfile
# EnableSendfile: 控制内核传送文件是否支持（需要OS支持）。默认为on,如果使用NFS,则使用off
#EnableSendfile off
#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#ErrorLog: 出错日志文件
如果你想为虚拟主机定义Errorlog指令，则该虚拟主机的错误信息将被记录到这里
ErrorLog logs/error.log
#
# LogLevel: Control the number of messages logged to the error.log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
# LogLever: 日志等级，（与log4j相似，译者注），决定哪些级别的出错信息将被记录，如debug,info,notice,warn,error, crit，alert,emerg等，在设定级别以上的信息就会被记录(译者注).
LogLevel warn
#
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
# 日志格式(与log4j相似)
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
# You need to enable mod_logio.c to use %I and %O
#LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio